LabsLand Teach lessons

• STM32 Nucleo (Mbed)
• 60 min
• Elektronik vokasional menengah atas / pengenalan
• Bahasa Melayu

STM32 Mbed CodeIDE (3/8): butang, perintang tarik naik dan nyahpantul

Pelajar membaca butang aktif-rendah dengan DigitalIn dan PullUp dalam Mbed, menguji nyahpantul dan mengaitkan bukti butang dengan keluaran LED pada papan STM32 sebenar.

• Baca input butang tekan dengan Mbed `DigitalIn`.
• Sahkan sama ada butang berkelakuan sebagai aktif-rendah dalam paparan makmal semasa.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 60 min
• Upper secondary / introductory vocational electronics
• English

STM32 Mbed CodeIDE (3/8): buttons, pull-ups, and debounce

Students read active-low pushbuttons with Mbed DigitalIn and PullUp, test debounce behavior, and connect button evidence to LED output on a real STM32 board.

• Read a push button with Mbed `DigitalIn`.
• Verify whether the button behaves as active-low in the current lab view.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 55 min
• Ensino médio / formação técnica introdutória em eletrônica
• Português (Brasil)

STM32 Mbed CodeIDE (4/8): depuração serial com printf

Os estudantes usam printf para depuração serial no STM32 Mbed CodeIDE, comparam o comportamento esperado com o real e corrigem uma inconsistência com base em evidências.

• Use `printf()` para observar o que um programa Mbed em execução está fazendo.
• Imprimir valores inteiros em vez de depender da formatação de ponto flutuante.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 55 min
• Secundaria (16–19 años)
• Español

STM32 Mbed CodeIDE (4/8): depuración serie con printf

El alumnado usa depuración serie con printf en STM32 Mbed CodeIDE para comparar comportamiento esperado y real, y corregir una discrepancia con evidencia.

• Usar `printf()` para observar qué está haciendo un programa Mbed en ejecución.
• Imprimir valores enteros en vez de depender de formato de punto flotante.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 55 min
• Elektronik vokasional menengah atas / pengenalan
• Bahasa Melayu

STM32 Mbed CodeIDE (4/8): penyahpepijatan bersiri dengan printf

Pelajar menggunakan printf penyahpepijatan bersiri dalam STM32 Mbed CodeIDE untuk membandingkan kelakuan yang dijangka dan sebenar, kemudian membetulkan ketidakpadanan dengan bukti.

• Gunakan `printf()` untuk memerhati apa yang sedang dijalankan oleh program Mbed.
• Cetak nilai integer dan bukannya bergantung pada pemformatan titik terapung.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 55 min
• Upper secondary / introductory vocational electronics
• English

STM32 Mbed CodeIDE (4/8): serial debugging with printf

Students use printf serial debugging in STM32 Mbed CodeIDE to compare expected and actual behavior, then fix a mismatch with evidence.

• Use `printf()` to observe what a running Mbed program is doing.
• Print integer values instead of relying on floating point formatting.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 60 min
• Elektronik vokasional menengah atas / pengenalan
• Bahasa Melayu

STM32 Mbed CodeIDE (5/8): amaran voltan analog

Pelajar membaca potensiometer dengan Mbed AnalogIn, menukar nilai kepada amaran voltan dan mengesahkan kelakuan ambang pada papan sebenar.

• Baca input analog dengan Mbed `AnalogIn`.
• Tukar bacaan biasa kepada milivolt anggaran.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 60 min
• Upper secondary / introductory vocational electronics
• English

STM32 Mbed CodeIDE (5/8): analog voltage warning

Students read a potentiometer with Mbed AnalogIn, convert the value to a voltage warning, and verify threshold behavior on the real board.

• Read an analog input with Mbed `AnalogIn`.
• Convert a normalized reading into approximate millivolts.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 60 min
• Ensino médio / formação técnica introdutória em eletrônica
• Português (Brasil)

STM32 Mbed CodeIDE (5/8): aviso de tensão analógica

Os estudantes leem um potenciômetro com Mbed AnalogIn, convertem o valor em uma indicação de tensão e verificam na placa real o comportamento dos limites.

• Ler uma entrada analógica com Mbed `AnalogIn`.
• Converter uma leitura normalizada em milivolts aproximados.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 60 min
• Secundaria (16–19 años)
• Español

STM32 Mbed CodeIDE (5/8): aviso de voltaje analógico

El alumnado lee un potenciómetro con AnalogIn de Mbed, convierte el valor en un aviso de voltaje y verifica umbrales en la placa real.

• Leer una entrada analógica con `AnalogIn` de Mbed.
• Convertir una lectura normalizada en milivoltios aproximados.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 60 min
• Secundaria (16–19 años)
• Español

STM32 Mbed CodeIDE (6/8): brillo PWM y control RGB

El alumnado usa PwmOut de Mbed para controlar brillo de LEDs y niveles RGB, y registra cómo el ciclo de trabajo cambia la salida real de la placa.

• Usar `PwmOut` de Mbed para controlar brillo de salida.
• Relacionar ciclo de trabajo con brillo visible o balance de color.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 60 min
• Ensino médio / formação técnica introdutória em eletrônica
• Português (Brasil)

STM32 Mbed CodeIDE (6/8): controle de brilho por PWM e RGB

Os estudantes usam Mbed PwmOut para controlar o brilho de LEDs e os níveis de cor RGB, depois registram como o ciclo de trabalho altera a saída da placa real.

• Usar Mbed `PwmOut` para controlar o brilho de uma saída.
• Relacionar o ciclo de trabalho ao brilho visível ou ao equilíbrio de cores.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 60 min
• Upper secondary / introductory vocational electronics
• English

STM32 Mbed CodeIDE (6/8): PWM brightness and RGB control

Students use Mbed PwmOut to control LED brightness and RGB color levels, then record how duty cycle changes real-board output.

• Use Mbed `PwmOut` to control output brightness.
• Relate duty cycle to visible brightness or color balance.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 60 min
• Elektronik vokasional menengah atas / pengenalan
• Bahasa Melayu

STM32 Mbed CodeIDE (6/8): PWM kecerahan dan kawalan RGB

Pelajar menggunakan Mbed PwmOut untuk mengawal tahap kecerahan LED dan warna RGB, kemudian merekodkan cara kitaran tugas mengubah output papan sebenar.

• Gunakan Mbed `PwmOut` untuk mengawal kecerahan output.
• Hubungkaitkan kitaran tugas dengan kecerahan yang boleh dilihat atau keseimbangan warna.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 60 min
• Secundaria (16–19 años)
• Español

STM32 Mbed CodeIDE (7/8): control de posición de servo

El alumnado controla un servo con pulsos PWM de Mbed, prueba posiciones con seguridad y registra evidencia aproximada de movimiento en el montaje remoto STM32.

• Controlar una salida de servo con `PwmOut` de Mbed.
• Mapear una lectura de potenciómetro a un ángulo aproximado.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 60 min
• Ensino médio / formação técnica introdutória em eletrônica
• Português (Brasil)

STM32 Mbed CodeIDE (7/8): controle de posição do servo

Os alunos controlam um servo pelas larguras de pulso PWM do Mbed, testam posições com segurança e registram evidências de movimento aproximado na configuração remota STM32.

• Controlar a saída de um servo com `PwmOut` do Mbed.
• Mapear a leitura de um potenciômetro para um ângulo aproximado.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 60 min
• Elektronik vokasional menengah atas / pengenalan
• Bahasa Melayu

STM32 Mbed CodeIDE (7/8): kawalan kedudukan servo

Pelajar mengawal servo dengan lebar nadi Mbed PWM, menguji kedudukan dengan selamat dan merekodkan bukti pergerakan anggaran daripada persediaan STM32 jauh.

• Kawal keluaran servo dengan Mbed `PwmOut`.
• Petakan bacaan potensiometer kepada sudut anggaran.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 60 min
• Upper secondary / introductory vocational electronics
• English

STM32 Mbed CodeIDE (7/8): servo position control

Students control a servo with Mbed PWM pulse widths, test positions safely, and record approximate movement evidence from the remote STM32 setup.

• Control a servo output with Mbed `PwmOut`.
• Map a potentiometer reading to an approximate angle.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 65 min
• Upper secondary / introductory vocational electronics
• English

STM32 Mbed CodeIDE (8/8): integrated controller capstone

Students combine analog input, button acknowledgement, RGB/status LED output, and serial evidence to build a small integrated STM32 controller.

• Combine analog input, button input, RGB PWM output, a status LED, and serial evidence in one controller.
• Use a test matrix to prove controller behavior one state at a time.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 65 min
• Elektronik vokasional menengah atas / pengenalan
• Bahasa Melayu

STM32 Mbed CodeIDE (8/8): projek akhir pengawal bersepadu

Pelajar menggabungkan input analog, input butang, output RGB/LED status dan bukti bersiri untuk membina pengawal STM32 bersepadu yang ringkas.

• Gabungkan input analog, input butang, output RGB PWM, status LED dan bukti bersiri dalam satu pengawal.
• Gunakan matriks ujian untuk membuktikan tingkah laku pengawal satu keadaan pada satu masa.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 65 min
• Ensino médio / formação técnica introdutória em eletrônica
• Português (Brasil)

STM32 Mbed CodeIDE (8/8): projeto final de controlador integrado

Os alunos combinam entrada analógica, reconhecimento pelo botão, saída RGB, LED de status e evidência serial para construir um pequeno controlador STM32 integrado.

• Combine entrada analógica, entrada de botão, saída RGB PWM, um LED de status e evidência serial em um controlador.
• Use uma matriz de teste para provar o comportamento do controlador, um estado por vez.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Mbed)
• 65 min
• Secundaria (16–19 años)
• Español

STM32 Mbed CodeIDE (8/8): proyecto final de controlador integrado

El alumnado combina entrada analógica, botón de confirmación, salida RGB/LED de estado y evidencia por consola serie para construir un controlador STM32 integrado.

• Combinar entrada analógica, entrada de botón, salida PWM RGB, un LED de estado y evidencia serie en un controlador.
• Usar una matriz de pruebas para demostrar el comportamiento del controlador estado por estado.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Arduino)
• 50 min
• Grade 10-12 / introductory vocational electronics
• English

STM32 with Arduino API (1/4): first blink

Students use STM32 CodeIDE with the Arduino API to write setup() and loop(), blink a real output, and document compile/upload evidence.

• Write a minimal Arduino sketch for an STM32 board.
• Distinguish the code that prepares the board from the code that repeats.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session

• STM32 Nucleo (Arduino)
• 55 min
• Grade 10-12 / introductory vocational electronics
• English

STM32 with Arduino API (2/4): sequence and buttons

Students extend an STM32 Arduino sketch with multiple LEDs and button input, then explain how sequence timing and button state affect output.

• Create an output sequence using a list of pins.
• Read an active-LOW button and use it to change behavior.

Includes student questions and response prompts.

Preview lesson Sign in to create a class session