Educator catalog
Explore public remote-lab activities to use with your class.
502 public lessons available
Turn three readings from a real syringe run into an engineering recommendation with a pressure limit and safety margin.
Includes student questions and response prompts.
Compare 35°, 45°, and 55° in the Projectiles remote lab while keeping trajectory and launch level fixed.
Includes student questions and response prompts.
Use velocity, flight time, and result-image readings to compare predicted and observed range in the Projectiles lab.
Includes student questions and response prompts.
Use horizontal launches to practice result-image reading, the +1 m correction, and measurement uncertainty.
Includes student questions and response prompts.
Measure how detector counts change with distance and test an inverse-square model.
Includes student questions and response prompts.
Students use repeated measurements from the remote lab to investigate how the detected count changes as distance increases and whether a straight line describes the pattern well.
Includes student questions and response prompts.
Students compare seven remote-lab configurations, calculate the percentage of the detected count that remains, and use the pattern to identify evidence consistent with alpha, beta, and gamma radiation.
Includes student questions and response prompts.
Students predict, measure and compare the equivalent resistance of three real networks in LabsLand Hive: two resistors in series, two in parallel, and a mixed network.
Includes student questions and response prompts.
Students use the Snell's Law (II) remote lab to read incident and refracted angles, calculate refractive index, compare media, and observe total internal reflection.
Includes student questions and response prompts.
Use three curated recordings from the real Spring lab to test whether equal increases in starting distance produce comparable increases in early motion span.
Includes student questions and response prompts.
Use four readings from a real syringe run to discover what happens to pressure when trapped air has less space.
Includes student questions and response prompts.
Collect 30 counts, construct a histogram and compare the spread with a counting model.
Includes student questions and response prompts.
Students use STM32 Mbed CodeIDE to edit main.cpp, compile and upload a DigitalOut blink program, and record LED evidence from the real board.
Includes student questions and response prompts.
Students program timed LED sequences on a real STM32 board with Mbed DigitalOut and delays, then change timing and explain the observed order.
Includes student questions and response prompts.
Students read active-low pushbuttons with Mbed DigitalIn and PullUp, test debounce behavior, and connect button evidence to LED output on a real STM32 board.
Includes student questions and response prompts.
Students use printf serial debugging in STM32 Mbed CodeIDE to compare expected and actual behavior, then fix a mismatch with evidence.
Includes student questions and response prompts.
Students read a potentiometer with Mbed AnalogIn, convert the value to a voltage warning, and verify threshold behavior on the real board.
Includes student questions and response prompts.
Students use Mbed PwmOut to control LED brightness and RGB color levels, then record how duty cycle changes real-board output.
Includes student questions and response prompts.
Students control a servo with Mbed PWM pulse widths, test positions safely, and record approximate movement evidence from the remote STM32 setup.
Includes student questions and response prompts.
Students combine analog input, button acknowledgement, RGB/status LED output, and serial evidence to build a small integrated STM32 controller.
Includes student questions and response prompts.
Students use STM32 CodeIDE with the Arduino API to write setup() and loop(), blink a real output, and document compile/upload evidence.
Includes student questions and response prompts.
Students extend an STM32 Arduino sketch with multiple LEDs and button input, then explain how sequence timing and button state affect output.
Includes student questions and response prompts.
Students read a potentiometer with analogRead(), map the value to RGB output, and test real-board color and threshold behavior.
Includes student questions and response prompts.
Students combine potentiometer input, decisions, RGB/LED output, and serial evidence to build a compact STM32 Arduino mini-controller.
Includes student questions and response prompts.
